Bitatto White

(1) Remove the up port seal of the wet sheet. Please be careful not to tear the bag ※. (2) Remove the body back of peeling paper. ※ Please note that not remove the adhesive sheet together. (3) up port and paste that can not be wrinkles around. ※ will cause the contents when the gap is free on the adhesive surface is dry. Please re-paste when you're gap. (4) When to be peeled off from the base slowly with the body. ※ There is a risk of damage and pull in a state in which the lid is open. In addition, if vigorously peeled off, rarely pressure-sensitive adhesive sheet may remain in the base. (5) when the weakened dirt and dust in the adhesive force, or remove the dirt in wiping water, please dry naturally rinse lightly with water. Please wipe gently with a neutral detergent or alcohol when the oil such as hand red and ink is attached.

Lid main body: PP Exterior: OPP Adhesive material: urethane elastomer

- it does not correspond to all of the manufacturers and size. (Outlet size: 51X90mm) - such as the base of the water-oil-hand red dust to be attached is removed, please use from. - dirty use of a coarse material as a base and uneven, please stop. • When you touch the adhesive surface, you may pressure-sensitive adhesive force is reduced. · Adhesive surface Please do not hit to direct sunlight. It will be the cause of the discoloration and deterioration of the pressure-sensitive adhesive surface. • If the discoloration of the adhesive surface was found, please use make sure the adhesive force. - Please do not use it for valuables. - Remove the dirt on the adhesive surface If you can no longer be re-utilization recommended replacement. ※ will vary depending on the operating environment and frequency, but it is about four months a measure of before and after the exchange. - Please keep out of reach of children. • Since the pressure-sensitive adhesive sheet is processed by one by one by hand, there may be a slight difference in the finish may occur, but please understand beforehand.