Earth Chemical Raku Hapi Air Conditioner Mold Prevention Gap Wiper Wet Type Fragrance-Free

◆ How to assemble the wiper ・ Push the grip firmly with a round hook up to the head of the head. It is removable and can be stored compactly. ◆ How to attach a moldy sheet (1) Put a moldy sheet over the head. (2) Fix through a round hook through the hole (cut) at the end of the moldy sheet. ◆ How to use (1) Turn off the air conditioner and remove the plug from the outlet. (If you do not get out of the plug, drop the breaker.) (2) When the power is turned off, the flap (upside down louver, wind plate) at the exposure entrance is closed, so open it slowly by hand. (3) Insert the wiper along the inner wall from the exposure of the air conditioner and wipe it. ・ One piece of air conditioner can be used to prevent mold in the pumping outlet for one air conditioner. (If you are particularly concerned about dirt, please use the second piece.) ・ You can use it on both sides.

Mold components (Cethylpilidinium chloride, isopropyl methylphenol), cleaning ingredients (non -ionic surfactants), dustyigard components, coating agents, deodorants.

【liquid】 neutral 【size】 Seat: Approximately 215mm x 40mm Wiper: Total length about 375mm

Seat: Polyester Wiper: Polypropylene

・ Do not use other than applications. ・ It cannot be used for air conditioning that does not open the flap (up and down wind louver) at the exposure of the fleet. ・ Do not use for air conditioning, blast fan, outdoor unit, air conditioner electrical portion (sensor, electronic substrate, switch, motor part). ・ After use, wash your hands well with water. ・ For roughness, use cooking gloves. ・ Do not rub your eyes or face with the hand touching the seat. If you get into your eyes, rinse with water immediately. ・ The sheet is dried, so the mold effect will be eliminated, so use it as soon as you take it out of the bag. ・ Do not leave the sheet left out of the bag for a long time. The place you put may discolor. ・ Move the air conditioner flap (up and down wind louver, wind plate) slowly. If you move it vigorously, it may break. ・ When using, do not put too much effort. The wind -oriented louver (wind plate) may come off or the wind fan and the wiper may be damaged. ・ Do not force the wiper head part to enter. The seat may come off or the wiper may be damaged. ・ If the seat comes off, secure it with a rubber band. ・ Because the seat does not dissolve in water, do not pour into the toilet. ・ When the wiper head is dirty, wash it with water and dry well. ・ It is not placed in a place where children can reach, near the fire, direct sunlight, or high temperature.