Cow Brand Additive-Free Foaming Facial Cleanser [Refill]

After retention, pick up an appropriate amount (press 2-3 times) and wash it gently while spreading the entire face. After that, rinse thoroughly with water or lukewarm water. [How to replace it] (1) Slowly cut off the dotted line from the cut at the top of the pack, and bend it so that it becomes a triangle. * Please note that if you cut the back strongly, the liquid may pop out. (2) Insert the spout firmly into the mouth of the bottle. (3) Create a bottle while inserted and squeeze the contents slowly. ・ Since the preservative is not used, wash the bottle and pumps well in tap water before turning them up, dry them well and then remove them. When washing the pump, do not press the pump so that water does not enter inside. If water enters inside, it may not cause bubbles. * If the clean foam does not appear, remove the pump part from the main unit and press it upside down several times. ・ Do not mix with other products or water. ・ When you remake it, please remove the whole amount at once. * This product may feel the unique smell of raw materials because the fragrance and quality stabilizers are not added, but there is no problem with the quality.

Water, DPG, Lauroyl methylalanine NA, PEG-400, Lauroyl asparagin Na, Laurelhidroxystine, polygrin-10, hyaluronic acid NA, Ceramide NG, glycine, cocoyl glutamate, laurelberin, laurelberine, PEG-. 2m, lauric acid, citric acid

・ Please be careful if your skin is abnormal. ・ If it does not fit your skin, discontinue use. Rinse immediately when you get into your eyes. ・ Store in a place where infants are out of reach. ・ Do not place it in a high temperature or a place with direct sunlight. ・ If it is difficult to foam at low temperature, return to room temperature before use. ・ Please use it as soon as possible after opening. ・ If the spout is difficult to cut by hand, cut it with scissors.