Tinkle Rinse for Bath Water-Saving Type

[How to use] ● When using the match by turning the spray tip to "ON". ● after rubbing with a sponge or spray directly on the stain, rinse with water. If the dirt is not, after rubbing with a sponge or the like from the place 2-3 minutes, rinse with water. ● The eradication, flush with water from at spray to 1-2 minutes. (Not all of the bacteria to eradication.) ● store be sure to spray tip after use in accordance with the "OFF". ● When there is no more liquid "Refill" (sold separately) Please purchase a. The spray container is only "water-saving type rinse Twinkle for the bath." Estimated use] 1 to about nine times against square meters injection

Acetic acid (1.5%), surfactant (alkyl betaine), chelating agents, solvents

● Do not use outside applications. ● chlorine-based cleaning agents and bleach because the effect is fall, not used in conjunction with slime removing agent. ● When use is to wear gloves, such as for cooking. ● use and good ventilation. ● Do not spray towards the people. ● Do not spray while the leading edge to "OFF". When set to "ON", note that a small amount of liquid popping. ● When you want to use at a higher place than eye wash it with a sponge or cloth. ● Since the bath so (including the artificial marble) and the floor, walls, painted surfaces of the part of the plastic there are things that cause stains, it does not stand for at least 10 minutes over the stock. ● stubborn water red dirt, it may dried white film does not get rid appear. This is what is silicic acid contained in such as tap water has accumulated, I can not drop in this product. Please take rubbed with liquid type of cleanser like. ● After use, wash with well water in hand. ● Do not put in the place where children can reach.