Bitatto+Clear (Bitatto Plus Clear) Clear

(1) Remove the up port seal of the wet sheet. Please be careful not to tear the bag ※. (2) Remove the body back of peeling paper. (3) up port and paste that can not be wrinkles around. ※ will cause the contents when the gap is free on the adhesive surface is dry. Please re-paste when you're gap. (4) when peeled off from the wet sheet package slowly with a body. ※ There is a risk of damage and pull in a state in which the lid is open. In addition, if vigorously peeled off, rarely pressure-sensitive adhesive sheet may remain in the base. (5) When the adhesive force is weakened in such as dust, remove gently with a wash, please dry naturally. Please wipe gently with a neutral detergent or alcohol when the oil such as finger marks is attached.

Lid main body: PP Exterior: OPP Adhesive material: urethane elastomer

- it does not correspond to all of the manufacturers and size. (Outlet size: 44X87mm) - on the properties of silicon that is used in the spring, in the case of a long period of time unused, such as during initial use, you may not smoothly open and close, but will improve with the opening and closing several times. Please confirm that if the improvement is not seen is inserted all the way into the silicon or the upper lid pocket. And water of the wet sheet of the package, oil, finger marks, please use from dust, etc. are removed. - dirty use of a coarse material as a base and uneven, please stop. • When you touch the adhesive surface, you may pressure-sensitive adhesive force is reduced. · Adhesive surface Please do not hit to direct sunlight. It will be the cause of the discoloration and deterioration of the pressure-sensitive adhesive surface. • If the discoloration of the adhesive surface was found, please use make sure the adhesive force. - peeling Remove the paper and cause of deterioration if left the adhesive surface. If not used or put in without removing the wet sheet package, to save attached like a plastic underlay. - Please do not use it for valuables. - Remove the dirt on the adhesive surface If you can no longer be re-used and recommended replacement.