Breastmilk Feeling Baby Bottle, Heat-Resistant Glass, Light Green, 240ml

[How to assembly] ※ before assembling, please make sure to open the vent valve. 1. have as crush tightly the seat plate portion of the nipple. 2. Insert all the way to one side of the nipple seat plate from the top of the cap. 3. Fit the whole seat plate to the inside of the cap with the thumb of both hands. 4. This is a set completion. Please make sure not distorted seat plate upside down. 5. fit the nipple and cap to the bottle. So that the cap does not come off, please be tightened properly. - the first time even before you wish to use Let's always cleaned and disinfected. - after use, immediately immersed in warm water, let's wash in, such as "Pigeon baby bottle vegetable wash". • The cleaning of glass bottles, let's use a nylon brush. · Ventilation valve and the ventilation holes, please refer to the gentle also seen washing the smoke hole with both hands. Strong wash or, to avoid the valve and or pull, cause of the leakage. And secure white powder form of the food additive to protect the ventilation valve and a Yes is applied. Please use the wash at the beginning. - the tip of the nipple is very delicate. Please wash while pressing the tip of the nipple with a finger field when you wash with, such as cleaning brush. - when cleaning the bottles, the abrasive-containing wool, metal wool or cleanser, please do not use some of the risk of flaws occurring during cleaning. There can lead to cracking.

● Material Food cap: Polypropylene Nipple: synthetic rubber (silicone rubber) Bottles: borosilicate glass

Glass bottles will crack and join an impact such as drop-hit. • Each time you use, cracks and scratches, please be especially sure that there is no chipping of the threaded portion. - skips or debris when the crack, you may owe a big injury with a sharp cross-section. • Do not drop, you crack an impact, such as bumping is applied. Please pay attention to handling. The-milk formula, be sure to once by boiling, please use the hot water cooling to 70 degrees or more. - is like in winter or crack and suddenly put the hot water immediately after boiling so we become cold and the baby bottle, it may cause burns. • When cool, there is a possibility that the crack to be quenched with, such as ice water. - Please cooled slowly always in the water reservoir such as running water and cooking bowl. - cracks each time you wish to use, (such as in particular threaded portion, small scratches and chipping) scratches Please check whether there is any. If there are scratches and chipping, because there is a risk to cut your hands or broken, please replace it with a new one. • The children, please do not have is never alone. Do not drop, it is dangerous cracked when the Dari fell. - timing milk will be hotter bottle. Please note burns. · The formula should be prepared beside the children, please stop. There is a risk of burns. - Please nursing the temperature of the milk and drink from be sure to check. There is a risk of burns. • After boiling disinfection or after microwave disinfection, it will also be hot bottle. Please note burns. At the time, milk formula, breaking-out is contents and shake the bottle to the vertical, it is dangerous there is a risk of burns. In addition, it shakes and set the hood, there is the danger that the risk of increased leakage and breaking-out is the internal pressure of the baby bottle by the high temperature of the hot water. · Bottle is intended to give the baby of breast-feeding and other drinks. Please do not use for any other purpose. - the scale of the bottle is a guideline for the milk formula. If you need more precise accuracy, please use the measuring cup and measuring spoon.