Pigeon Breastmilk Feeling Baby Bottle, Heat-Resistant Glass, Light Green, 160ml

Before [assembly how] ※ assemble, please make sure to open the vent valve. 1. have as crush and squeeze the seat plate portion of the nipple. 2. Insert all the way on one side of the nipple seat plate from the top of the cap. 3. Fit the whole seat plate to the inside of the cap with the thumb of both hands. 4. This is a set completion. Please make sure not distorted seat plate upside down. 5. fit the nipple and cap to the bottle. So that the cap does not come off, please tighten properly. - The first time even before you use Let's always cleaning and disinfection. · After use, immediately immersed in warm water, let's wash with, such as "Pigeon baby bottle vegetable wash". • The cleaning of the glass bottle, let's use a nylon brush. · Ventilation valve and the ventilation holes, please refer to the gentle also seen washing sucks hole with both hands. Strong wash or, to avoid the valve when you pull or cause of the leak. And secure white powdery food additives in order to protect the ventilation valve and a Yes is applied. Please use the wash at the beginning. - The tip of the nipple is very delicate. Please wash while pressing the tip of the nipple with a finger field when you wash with, such as cleaning brush. • When cleaning the baby bottle, abrasive scourer, such as steel wool or scouring powder, please do not use some of the fear that flaw occurs during cleaning. There is a risk that leads to cracking.

Material ● Food cap: Polypropylene Nipple: synthetic rubber (silicone rubber) bottles: borosilicate glass

Glass bottles will crack and join the impact, such as drop-hit. • Each time you use, cracks or scratches, please especially sure that there is no chipping of the threaded portion. - Skips or debris when the crack, you may owe a big injury with a sharp cross-section. • Do not drop, you crack an impact, such as crush is applied. Please be careful in handling. The-milk formula, be sure to once by boiling, please use the hot water cooling to more than 70 degrees. - Is such as in winter or crack and suddenly put the hot water immediately after boiling because it is cold and the baby bottle, it may cause burns. • When cool, there is a risk of break and quenched with such as ice water. - Please cooled slowly always in the water reservoir such as running water and cooking bowl. - Cracks each time you intend to use, (such as in particular threaded portion, small scratches and chipping) scratches Please make sure there is no. If there are scratches and chipping, because it may cut your hands or broken, please replace it with a new one. • The children, please do not have is never alone. Do not drop, it is dangerous cracked when the Dari fell. - The timing milk will be hotter bottle. Please note the burns. · Be milk tone beside the children, please stop. There is a risk of burns. - Please nursing the temperature of the milk and drink from always check. There is a risk of burns. • After boiling disinfection or after microwave disinfection, will also be hot bottle. Please note the burns. At the time, milk formula, spouting the contents and shake the bottle in a vertical, there is the danger that is a risk of burns. Also, shake and set the hood, there is the danger that is a risk of increased leakage and spouting the internal pressure of the bottle by the high temperature of the hot water. · Bottle is intended to give the baby of breast-feeding and other drinks. Please do not use for any other purpose. - The scale of the bottle is a guideline for the milk formula. If you need more precise accuracy, please use a measuring cup and measuring spoon.