ChuChuBaby Snot Cutel 2WAY 1pc

● air valve of the case nozzle to suck in the pump has to be upward, in a state in which the holding down the pump, let along the nozzle to the runny nose of the child, to suck the snot loosen slowly pump. • In order to air valve prevents the blown air to the nose, in succession while keeping along the nozzle to the runny nose you can use. ※ If you put the hole in the nose, please be sure to use in the state where your mouth is open for children. ● If you want to suction in your mouth (1) Install the joints with a tube to the cylindrical portion of the remains with the air valve. (2) Install the previously mouthpiece of the tube. (3) was the mouthpiece from in addition to the mouth in a stable position the child, please suction while adjusting the power to suck in and along the nozzle to the runny nose of the child. ※ If you put the hole in the nose, please be sure to use in the state where your mouth is open for children.

● nozzle pump valve (green) tube: Silicone ● body (cylinder), the mouthpiece: PP (polypropylene) ● joint: PE (polyethylene) ● Case: PET (polyethylene terephthalate)

● Target age: from newborn ● disinfection method: [nozzle body (cylinder) Pump valve (green) Tube mouthpiece] Allowed (boiling, chemicals, microwave oven), [joint] Allowed (liquid chemical) not ( boiling, microwave oven), [case] not possible (boiling, chemicals, microwave oven)

Should not be used in addition to the prohibitions ● Applications. If you want to use for children is that parents do. It may lead to an unexpected accident. ● forcibly can not thrust into the hole in the nose of the nozzle. It and hurt the nasal mucosa, there is a possibility that the cause of the nosebleed. ● it is in a state in which the mouth of the child is closed does not use absolutely. It affects your ability to the middle ear. ● Do not use by modifying the product (including parts). There is a risk that lead to unexpected accident. ● If a child is suspected of serious infections, it does not use. ● Do not use the pump and the tube at the same time. ● Do not use in close contact with the nozzle portion into the hole in the nose. Notes ● solids, please be careful not to force the smoke. If there is a firm became runny nose, please use this product after removal with tweezers or the like is soft in baby oil and the like. ● When using, please use a stable low posture. As not to damage the mucous membranes of the nose, it is recommended an attitude that can be confirmed. ● each part because of the accidental ingestion prevention please use the firmly set. ● When the pump does not return, please spread to both sides of the backflow prevention valve which are about the nozzle at your fingertips. Valve you may have to stick (Hittsuki). ● Please note that not too Push the air valve. Pump you may not be able to press. ● backflow prevention valve, air valve has been cracked ahead for air flow, but this is not a malfunction. ● When the air valve is out, please spread to both sides of the air valve of the cylinder at your fingertips. Tilting when the runny nose is collected in the nozzle ●, if you press the pump when it is attached directly to the air valve by the runny nose of viscosity, please note that there is a thing that runny nose is flowing out. ● after use and when it is used for the first time to decompose in each part, please washed with lukewarm water or water. The particular pump part, imperceptibly has entered a runny nose, it will when it is left to the cause of the mold such as generation. Please let me firmly dry after washing. ● silicone rubber, it is the nature of adsorbing around the dye and water, the smell. Please note the storage location. ● with a clean state in a location out of the reach of infants, avoid the heat and humidity, direct sunlight, put it in the case, please keep. Please note, in particular to small parts. Please be careful that you do not put in the mouth accidentally children.