Cojit Power Bio Cleans mold from shoe racks

・ First, if mold is currently growing, remove the mold before installing. (1) Wipe off with a tightly squeezed cloth so that dust or moisture does not remain in the place to apply. (2) After opening this product, first fill in the attached replacement guide with an oil -based pen, and paste it up or down on the surface of the main unit. (3) Remove the Hakuri paper on the back of the back and install it. ・ Installation location: The ceiling of the boxed box, inside the door * Depending on the material of the pasted part, it may not be possible. * Because there is a risk of falling, it cannot be pasted on the sliding door -type box door. [Estimated use per piece] Box size: Approximately 80 × depth 40 x height 100cm should be installed.

【set content】 The main unit, the replacement standard seal [Estimated replacement] About 4 months

Contents: Diatomaceous earth, microorganisms (Bacillus bacteria) Case: Polypropylene

・ Be careful not to shift your child. ・ Due to the characteristics of this product, the smell peculiar to the product may be made for a while at the time of opening and installation. The smell fades as you use it. Also, there is no effect on the quality of the smell. ・ The effect duration varies slightly depending on the usage status. ・ Bio is a living thing. Since the activity changes depending on the environment, the time when the effect appears varies depending on the situation. ・ If there are abnormally many organic matter, such as substances that cause dirt and odor in the environment, it will take time to feel the effect. ・ Due to the characteristics of the product, if it is installed at the bottom, the effect will not be demonstrated, so please install it at the top. ・ Please do not use a combination with a product with high sterilization and antibacterial effects during this product, as the bio may die. ・ This product suppresses mold proliferation, but can not remove mold pigment. ・ Please note that depending on the uneven surface and the material of the pasted part, it may fall. ・ Double -sided stickers may remain on the pasting part. If remaining, remove the commercially available seal with peeling. ・ Because of the use of playback plastic, it may have uneven color and spots. ・ Do not use for anything other than the original application.