Richell Soft Baby Bath K Beige

This product is a bathtub for babies. Target age: It can be used by children from newborn to around 6 months (about 60 cm tall).

(1) Put air into the main unit and inflate it. (2) Adjust the temperature of the hot water to an appropriate temperature (37-40 degrees) and put the MAX line. (3) After use, drain the water from the drain, wash it cleanly and dry in a well -ventilated place. * When removing air, press the air injection with your finger and gently press the main unit and remove the air. * Dry the surface of the main unit well before folding.

【size】 Outside dimensions (approx.) ... Width 68x depth 47x height 29 (cm) Depth inside dimensions ... about 28 (cm) * It varies slightly depending on the amount of air. 【capacity】 When full of water ... 25L Tolerent dose in use ... 10L (MAX line position)

Body, water stopcock, air injection exit ... vinyl chloride resin

・ Children do unexpected movements, so be sure to keep your parents with you and keep an eye on your child. ・ If you take your eyes off with hot water, you may be drowning, so please do not absolutely stop. ・ Be sure to take your child's head while bathing so that you do not dragon or water in your ears. ・ Do not move with your child on the main unit. ・ When airing air, inflate to the extent that wrinkles remain outside. If you put too much air, the air may expand and damage the hot water. ・ Be sure to check if there is no air leakage in the main unit before use. ・ Avoid using it for use. Do not use this product on the water. ・ Please use it in a flat and stable place. ・ Do not put hot water of 50 degrees or more. The body may be damaged. ・ Hot water is 37-40 degrees. Be sure to check before putting your child. ・ When performing hot water, children may burn, so please give your child from the hot water. ・ Do not move with hot water in this product. It may be damaged.