Bitatto Wet Sheet Lid Monpoke Friends

(1) Remove the outlet seal of the wet sheet. * Be careful not to break the package. (2) Remove the brush on the back of the main unit. (3) Paste so that wrinkles cannot be made around the outlet. * If there is a gap in the adhesive surface, the contents may dry. If there is a gap, please paste it. (4) When peeling off the package of the wet sheet, hold the body slowly. * If the lid is opened, it may be damaged. Also, if you peel off vigorously, the adhesive sheet may come off from the main unit. (5) If the adhesive strength is weakened by dust, etc., gently remove it with water and dry it naturally. If oils such as dirt are attached, gently wipe off with neutral detergent or alcohol. [If you feel that opening and closing is not smooth] (1) Remove the upper lid and make sure that the silicone rubber spring is inserted deep into the upper lid pocket. (2) If you do not use it for a long time, the spring will be addicted and may not open and close smoothly. In that case, remove the spring and reverse the front and back. ◆ How to remove the upper lid ◆ Remove the body with a flat surface, such as on a desk. Hold the center of the upper lid firmly and pull the protrusions of the connected portion to the front and remove it. Please note that if you pull it forcibly, it may be damaged. ◆ How to attach the upper lid ◆ Make sure that the silicone rubber spring is inserted into the back of the upper lid pocket, and insert the projection of the connected portion in the opposite order when removed.

[Correspondence outlet size] Within 87 x 44mm * Not all manufacturers and sizes.

Material / Body: Polypropylene, Spring: Silicone rubber Adhesive: Urethane elastomer Antibacterial: Inorganic antibacterial agent

・ Due to the characteristics of silicone rubber used in the spring, if it is unused for a long period of time, such as when using it for the first time, it may not open and close smoothly, but it will improve after opening several times. ・ Remove the water, oil, dirt, dust, etc. on the surface of the wet sheet before use. ・ If you touch the adhesive surface, the adhesive strength may be a fixed price. ・ Make sure that the adhesive surface does not hit direct sunlight. It may cause discoloration and deterioration. ・ Leaving the sticky surface while peeling off the paper may cause deterioration. If not, do not remove the package of the wet sheet or paste it on a plastic underlay. ・ If the adhesive surface is discolored, check the adhesive strength and use it. ・ This product can be used repeatedly, but the adhesive surface also deteriorates, so if you can not reuse even if you remove dirt, it is recommended to buy a new one. * It depends on the usage environment and frequency, but about 4 months is a measure of replacement. More than 100 consecutive detacial tests. ・ Do not use it for valuables. ・ Store in a place where your child is out of reach.